Neurotrac Myoplus EMG Biofeedback and Neuromuscular Stimulation

Myo Plus Biofeedband Neuromuscular Stimulation EMG Biofeedback and Neuromuscular Stimulation, separately or in combination are increasingly being used more to treat neuromuscular re-education in a wide range of Physiotherapy, Sports and Rehabilitation applications. The Combination of EMG plus Neuromuscular Stimulation is now being used successfully to treat a growing number of maladies such as Incontinence, in particular Stress, Prolapses, Urge, lack of sensitivity and weak Pelvic muscles; Stroke, Sports injuries, Patellofemoral Pain, Bells Palsy, Back pain and a wide range of muscular problems.

Key Benefits - Download Brochure (PDF)

• Portable Desk Top device. Combined single channel EMG/ Muscle Stimulation. Supplied with a desk top stand.
• EMG + Stimulation mode {Passive + Active}, EMG Triggered Stimulation, Muscle Stimulation and EMG Modes.
• Designed to be used for a wide range of Physiotherapy, Sports and Rehabilitation applications including Continence and Stroke treatment.
• Custom programs enabling up to 5 phases to be set up in one program.
• Optional Multilingual PC Database Software.
• Used as a learning tool with emphasis on improving treatment protocols using EMG and Neuromuscular Stimulation.
• Locks programmes and records Patient Home Compliance on a daily basis.
• Portable, light and user friendly.

Video 1 - Introducing the Myoplus

Video 2 - Introduction to ETS: What is ETS and how to use it.

• 1. EMG
•  
• 1.0 Single Channel
• 1.1 EMG Range: 0.2 to 2000 μV RMS (continuous)
• 1.2 Sensitivity: 0.l μV RMS
• 1.3 Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
• 1.4 Selectable Bandpass filter - 3db Bandwidth,
• a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% - Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% - Readingabove 235 microvolts
• b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
• 1.5 Notch filter: 50 Hz (Canada 60Hz) - 33 dbs (0. 1% accuracy)
• 1.6 Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
• 1.7 Battery: PP3 Alkaline
• 1.8 Work / Rest periods: 2-99 seconds
• 1.9 Number of Trials: 1-99
•  
• 2. Neuromuscular Stimulation
•  
• 2.1 Single Channel
• 2.2 Amplitude: 0-90 mA into 500 Ohm load - actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
• 2.3 Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
• 2.4 Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
• 2.5 Pulse width selection: 50-450 μS (2% accuracy)
• 2.6 Pulse rate selection: 2-100 Hz (2% accuracy)
• 2.7 Work / Rest periods: 2-99 seconds
• 2.8 Time 1 - 99 minutes
• 2.9 Ramp up time: 0.1 - 9.9 seconds
• 2.10 Preset and user programmable treatment Programs
• 2.11 Automatic output shut off with detection of open electrode above 0.5 mA
• Low battery indication at 7.4 volts +/- 0.2 volts and automatic shut off 4 minutes
• after pressing last key, unless infra-red is turned on.
• Note: Replace battery immediately.
•  
• Environmental Conditions for use:
• +10 to +30 degrees Centigrade. 0-90% Humidity.
• Environmental conditions for storage & transport:
• -10 to +50 degrees Centigrade. 0-90% Humidity.
• Physical Dimensions: Length 147 mm, Width 70 mm, Depth 28.9 mm
• Weight
• MyoPlus device: 0.13 Kg (without battaery)
• PP3 Alkaline battery: about 0.04 Kg

Write Review

Enter the code in the box below: