NeuroTrac Verity PelviTone

Dual Channel Stim Unit; suitable for urinary or rectal incontinence to educate and motivate patients ; for daily use to help retrain the pelvic floor. Use with Periform, Veriprobe, Novaty, Anuform or Surface electrodes sold separately.

Key Benefits - Download Brochure (PDF)

Dual channel PelviTone device has all the features of Continence device, plus:

• Advanced multi-phase programmes where treatment is split into time phases with different stimulation parameters;
• Stronger symmetrical stimulation with the reduced Pulse Width : 50 – 330 μS.
• Three Custom programmes plus 11 Preset Continence programmes.
• Lock mode function to  measure the home compliance (mA and time used)
• NeuroTrac ™ VeriProbe - The Vaginal probe for EMG and Electrostimulation.
• Suitable for urinary or rectal incontinence
• Digital dual channel
• To educate and motivate patients
• Set work/rest times and repetitions
• 11 built in programmes
• 3 customisable 5 segment programmes
• Records statistics:- Work/rest times /Usage Onset/muscle release times
• User friendly
• Can be used in pocket or upright on flat surface

PLEASE NOTE THAT THE NEUROTRAC™ PRODUCTS ARE NOT FOR SALE OR USE IN THE USA or CANADA

Specification

• Dual channel: individually isolated circuits.
• Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
• Type: Constant current,
• maximum output voltage 180 Volts +10 / -30 Volts
• Waveform: Symmetrical, rectangular bi-phasic with zero DC
• current.
• Selectable pulse width: 50 μS – 330 μS [2% accuracy].
• Pulse Rate selection: in the continuous mode 2 – 100 Hz
• [2% accuracy].
• Time duration of the treatment selectable: 1 minute to 90 minutes.
• Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2
• volts the battery symbol will flash on/off once every second.
• Open Electrode Detect: If an open circuit is detected at the
• output of channel A or B the output current will be reset at zero.
• Ramp up time 0.1 - 9.9 seconds.
• If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn
• on.
•  
• Physical dimensions: 134 x 69 x 29.7 mm.
• Weight: 0.18 KG with battery.
•  
•  
• Environmental Conditions for use:
• +10 to +30 degrees Centigrade. 0-90% Humidity.
•  
• Environmental conditions for storage & transport:
• -10 to +50 degrees Centigrade. 0-90% Humidity.

Write Review

Enter the code in the box below: