NeuroTrac Continence Stimulator NT4

£68.34 inc VAT

Availability:: In Stock
Model:: NT4
Average Rating:

Description
Reviews (0)
Additional Images (1)

NeuroTrac™ Continence Stim Unit may be able to help. Sit down, relax and ease your continence problems away. Home-use continence stimulators: for daily use to help retrain your pelvic floor.

PLEASE NOTE ELECTRODES SOLD SEPARATELY:- PERIFORM+, VERIPROBE, ANUFORM, NOVATY

Key Benefits - Download Brochure (PDF)

Suitable for urinary or rectal incontinence
Digital Dual Channel STIM unit
9 Built in programmes for ease of use
3 Customisable constant mode programmes
Ability to lock the unit
Records time in use and average current
User friendly
Compact, light and reliable
Dual channel
Can be used with: Periform, Anuform, Veriprobe and TS5050 surface electrodes also available on-line
Electrodes are NOT included, see electrodes page for ordering.

Specification

Dual channel: individually isolated circuits.
Amplitude: 0 - 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
Selectable pulse width: 50 μS - 450 μS [2% accuracy].
Pulse Rate selection: in the continuous mode 2 Hz - 100 Hz [2% accuracy].
Time duration of the treatment selectable: 1 minute to 90 minutes.
Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
Ramp up time 0.3 - 9.9 seconds.
If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
Physical dimensions: 108 x 62 x 23 mm.
Weight: 0.07KG without battery, 0.1KG with battery.
Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.
Environmental conditions for storage & transport:
10 to +50 degrees Centigrade. 0-90% Humidity.