ES601 Plus

Automated Electrical Safety Analyser

The large, graphical touch screen display provides excellent visibility with a full QWERTY keyboard and numeric keypad for data input for unprecedented ease of use.

Unleash the full potential of your ES601Plus with our ES601pc Companion Software. Simply install ES601pc and you’re ready to customize your ES601Plus to handle all your automated testing. ES601pc comes standard with your safety analyzer and allows you to view and print test reports and to customize all aspects of test automation, including safety, ECG, tester and PM checklist procedures.

Comply With Worldwide Safety Test Standards

Automate Test Sequences

Save Time, Money And Manpower!

Eliminate Human Error

  • Automated & Manual Electrical Safety Testing per AAMI/ANSI ES-1, IEC 60601 and IEC 62353, and VDE 751 standards
  • Integrated ECG & Arrhythmia Simulator
  • Automated Testing Sequences for defibrillators, infusion devices, patient monitors, and more
  • All Autosequences and Checklists are 100% editable for total procedural customisation Internal test record storage
  • Automatic “flagging” of test results that are outside of pre-established test limits
  • Prints test result reports & inspection stickers
  • Reduces paperwork, eliminates handwritten records, standardises medical device testing
  • Increases quality and accuracy
  • Increases throughput – saves more than 50% over manual testing & hand-written records
Please contact de Smit Medical Systems Ltd for further information about this product including;

  • Full product information / specification
  • Arranging a demonstration / evaluation
  • Pricing details
  • How to place an order
Call +44 (0)845 345 4226, or email us via our contact form.
Electrical Safety Testing Standards:
EC601-BAT (IEC60601 for
battery-powered medical device)
AAMI-BAT (AAMI-ES1 for battery-powered medical
VDE-BAT (VDE-0751 for battery-powered medical device)
(IEC62353 for battery-powered medical device)
Automated Testing:
By Safety AutoSequence
By ECG AutoSequence
By General
By Tester AutoSequence
By Test Procedure
By Device ID (Control
Number) Search
Manual Mode Safety Tests:
Line Voltage
Load Current
Insulation Resistance
Leakage Current
Voltage Measurement:
Range: 0.0 to 300.0 VAC
Accuracy: DC to 100Hz ±1% of reading ±1LSD
Load Current
Range: 0 – 20.00 amps AC
Accuracy: ±2% of reading ±1LSD
Insulation Resistance:
Range: 0.5 to 999.9 megohms
Accuracy: R ≤ 100MΩ, ±2% of reading ±1LSD
Protective Earth Resistance:
Range: 0.001 to 0.200 ohms at 25A AC ±/-10%
0.001 to 3.000 ohms at ±1A bipolar DC
Accuracy: ±1% of reading ±1LSD
Leakage Current:
Standards: IEC60601-1, AAMI-ES1:1996, VDE-0751, IEC62353, IEC61010
Range: 0 to 14,000 uA RMS / 0 to 25,000 uA DC
Method: True RMS reading
Accuracy: DC & 25Hz-200kHz – ±1% of reading ±2LSD
200kHz-1MHz – ±4% of reading ±3LSD
Mains on Applied Parts voltage is 110% of AC supply for IEC60601
tests,or 100% of AC supply for other safety standards.
ECG Simulator:
Performance Waveforms
DC Pulse: 4 seconds
Square Wave: 2 Hz
Triangle Wave: 2 Hz
Havertriangle Pulse: 10, 25, 40, 100 and 200 msec, @ 60 BPM
Sine Wave: 0.5, 10, 20, 40, 50, 60, 70 and 100 Hz
Normal Sinus Rhythm: 30, 60, 90, 120, 150, 180, 240 and 300 BPM
Arrhythmia Waveforms
Second Degree A-V Block (BLK II)
Premature Atrial Contraction
Right Bundle Branch Block (RBBB)
Premature Ventricular Contraction (PVC)
Run of 5 PVC
Multifocal PVC
Defibrillator/AED Test Waveforms:
Atrial Fibrillation (AFIB)
Supraventricular Tachycardia
Polymorphic VTach @ 140 BPM (PVT140)
Monomorphic VTach @ 160 BPM
Ventricular Fibrillation (VFIB)
Missed beat @ 80, 120 BPM
Output Amplitude:
Selectable: 1mV, 2mV, or 0.5 mV on Lead ll
Accuracy: – Rate: ±0.2%
– Amplitude: ±2%
User Interface:
Display Graphic LCD 4.53″ x 3.40″ (11.5 cm x 86 cm)
Monochrome backlit
x 240 pixel graphics
53 character x 30 lines text
Touch screen
Audio Indicator:
Single-frequency piezoelectric
Data Capacity:
176 Test Records (test data)
3,072 PM Test Data Items
Equipment Records
500 PM Test Procedures
24 Safety Test Autosequences
Test Autosequences
18 General Inspections
12 Pulse Oximeter Tester
12 IV Pump Tester AutoSequences
24 Defibrillator Tester
60 AutoSequences for user-defined Testers
Printer Port Data Output:
DB25F, Centronix standard
RS-232 Port Data Output:
DB9F, 9600 baud, N, 8, 1
USB Data Transfer/Capture:
Hardware Interface – USB Device
Protocol – USB 2.0 compliant, 1
Ethernet Data Transfer/Capture
Hardware Interface – RJ-45
Protocol – 10baseT, 10 Mbits/sec, maximum
Keyboard and Barcode Scanner Ports:
RS-232 barcode scanner
PS/2 keyboard or PS/2 barcode scanner
Equipment Technical Specifications:
Electrical-Region Specific:
115VAC(±/- 10%), 60 Hz, 16A
10%), 50 Hz, 13A
Environment for Use:
15 to 40 °C, 10% to 90% RH, Altitude: 2000m max.
Indoor use only,
Category II
9″ (23 cm) W x 9″ (23 cm) D x 10″ (25 cm) H
12 lbs (5.4 kg) Standard / 17 lbs (7.7 kg) with PETM option

All specifications subject to change without notice.

Support Information

Head Office:
  • Address
    • de Smit Medical Systems Ltd, Unit 15 Falcons Gate, Dean Road, Bristol, BS37 5NH, UK
  • Operating hours
    • Monday to Friday - 9am-5pm (excluding bank holidays)
Service Centre:
  • See Head Office above
  • Please contact the Service Centre regarding any equipment servicing/repair related queries or telephone troubleshooting
Trained Personnel:
  • 8 x sales technicians
    • 3 x medical engineers at Head Office
    • All trained to manufacturer standard
  • Warranty Repairs
    • 72 working hours response/resolver call-out for warranty repairs and service plans
  • Non-warranty Repairs
    • 72 hours subject to authorisation by customer for paid repair
Spare Parts:
  • Spare parts for MCube/Datrend products are available direct from de Smit Medical Systems Ltd
  • Next working day delivery if order received by 2pm on any given working day (subject to availability)

Five-Year Warranty on Datrend legacy Products

All Datrend legacy products are designed and manufactured under an ISO 13485 registered Quality System and a carry one (1) year from the date of original purchase.

This warranty will be automatically extended on a yearly basis, to a maximum of five (5) years from the date of original purchase, provided that calibration is performed on an annual basis by de Smit Medical Systems.