Infutest Solo

Single Channel Infusion Device Analyser

Highly accurate and cost-effective single-channel analyser
Infutest Solo meets the needs of customers who desire a highly accurate infusion device analyser capable of a measuring infusion device output flow patterns, including pulsatile flows, but can manage their work load with a cost-effective single-channel analyser.

Memory storage for up to 120 tests
The Infutest Solo has internal memory storage for up to 120 tests. Or, since Solo is a member of the Datrend ES601 Plus System Connectivity Family, you can connect Solo to the ES601 Plus program any of its 60 Tester Autosequences to automatically execute the infusion device test protocol of your choice.

Store and transfer data easily
When not connected to the ES601 Plus, it’s still easy to get information about the device under test into Solo. Just use the front panel keypad to enter or connect an external barcode reader to scan the control number of the pump you are testing. Store the test results on all of the pumps you process, then transfer the test data to the Infutest Solo PC Utility Software at your convenience via USB or RS232. It’s that easy!

Lightweight + Battery-Operated

Auto-Test Function

Accuracy – Better than 1% on ALL pumps, including Baxter Colleague and Alaris® Signature.
Portability – Infutest Solo allows both line and battery operation. Battery provides up to 30 hours of continuous operation.
Auto-Test Mode – Enables automatic flow and pressure test for VTBI/Dose accuracy tests and more.
Multi Pump Test Results – Infutest Solo will retain the test results for more than 120 pump tests in internal memory until downloaded to a PC.
Keypad Input – Infutest Solo allows the user to enter an equipment control number from the front panel keypad or by using the optional RS-232 barcode scanner to uniquely identify individual tests.
USB Connectivity – Infutest Solo incorporates USB communication capabilities for efficient data transfer to your PC.
Data Transfer – Infutest Solo comes complete with Windows based data transfer program (DTP-Solo) for quick and easy data transfer, plus organisation and printing of test results.
ES601 Plus Connectivity – Connect Solo to your ES601 Plus Automated Electrical Safety & Performance Analyser for the ultimate in capability and flexibility!

Flow Test

Flow Measurement:
Range: 1 – 1200 ml/hr
Resolution: 0.001 to 1 ml depending on rate
Accuracy: ± 1% of reading
Volume Measurement:
Range: 0 – 9999 ml
Resolution: 0.001 ml to 1 ml depending on volume
Accuracy: ± 1% of reading
Elapsed Time Measurement:
Range: 0 – 100 hours
Resolution: 1 second
Accuracy: +0 /-1 second
Format: HH:MM:SS (hours, minutes, seconds)

Occlusion Pressure Test
Pressure Measurement:

Range: 0 – 2586 mmHg (0 – 50 psi)
Resolution: 1 mmHg
Accuracy: ± 1% of reading, ± 5 mmHg
Elapsed Time Measurement:
Range: 0 – 100 minutes
Resolution: 1 second
Accuracy: +0 /-1 second
Format: MM:SS (minutes, seconds)

Automatic Pump Test

Infusion Timer:
Range: 0 – 9999 seconds
Resolution: 1 second
Accuracy: +0 /-1 second
Occlusion Timer:
Presets: OFF, 1, 2, 3, 5, 10, 20 min
Accuracy: +0 /-1 second
Non-Volatile Memory Capacity: 123 Test Records


User Interface:
20-character by 2-line LCD
12-button membrane-type keypad
contrast control
Fluid interface:
Input: Delrin twistlock, self-sealing
Output: Delrin twistlock
USB Port:
Connector: Type “B”
Protocol: USB 1.1 or USB 2.0 compatible
Data Rate: 64 bytes per millisecond


RS-232 Port
Connector: DB9M
Protocol: RS-232C; bidirectional; CTS handshaking; 9600 baud, 8-N-1
Power Supply:
Internal 12V NiCad, operation time (approx) 30 hours.
Universal 100-240 VAC to 18VDC c/w adapter clip
Adapter clips available for North America, Europe, UK, and
15°C to 40°C
10% to 90% RH
Indoor Use Only, Category II,
Pollution Degree 2
8.5″ W x 6″ D x 10″ H (22 cm W x 15 cm D x 26 cm H)
Unit and AC Adapter: 5.0 lbs. (2.3 kg)

Infutest Solo is for those with a light to moderate infusion device testing workload, where a high level of precision is desired.
Pulsatile Flow Compatible!

All specifications subject to change without notice.

Please contact de Smit Medical Systems Ltd for further information about this product including;

  • Full product information / specification
  • Arranging a demonstration / evaluation
  • Pricing details
  • How to place an order
Call +44 (0)845 345 4226, or email us via our contact form.

Support Information

Head Office:
  • Address
    • de Smit Medical Systems Ltd, Unit 15 Falcons Gate, Dean Road, Bristol, BS37 5NH, UK
  • Operating hours
    • Monday to Friday - 9am-5pm (Excluding bank holidays)
Service Centre:
  • See Head Office above
  • Please contact the Service Centre regarding any equipment servicing/repair related queries or telephone troubleshooting
Trained Personnel:
  • 7 x Sales technicians
  • 3 x Medical engineers at Head Office
    • All trained to manufacturer standard
  • Warranty Repairs
    • 72 working hours response/resolver call-out for warranty repairs and service plans
  • Non-warranty Repairs
    • 72 hours subject to authorisation by Customer for paid repair
Spare Parts:
  • Spare parts for MCube/Datrend products are available direct from de Smit Medical Systems Ltd
  • Next working day delivery if order received by 2pm on any given working day (subject to availability)

Five-Year Warranty on Datrend legacy Products

All Datrend legacy products are designed and manufactured under an ISO 13485 registered Quality System and a carry one (1) year from the date of original purchase.

This warranty will be automatically extended on a yearly basis, to a maximum of five (5) years from the date of original purchase, provided that calibration is performed on an annual basis by de Smit Medical Systems.