vPad-O2 is the next generation SpO2 tester. Built on the vPad platform, vPad-O2 is user programmable so new sensors can easily be added in the field without needing to send the unit back to a service centre for upgrading. Being part of the vPad-A1 family, vPad-O2 can be upgraded to include a Multi-Parameter Patient Simulator and / or a NIBP Simulator.
- Compatible with all major industry manufacturers
- Field editable R Curves allows for easy set up of new oximeters
- Unlimited preset patient simulations
- Five automated test sequences for determining oximeter alarm response time
- Four preset signal artifact simulations
- Easy to navigate
- Control via Bluetooth or USB
- Auto Settings
- Auto Sequences
- Test reports
- Field upgradeable
vPad-O2™ Performance Specifications
| Saturation (SpO₂) | |
|---|---|
| Range: | 30% to 100% |
| Increments: | 1% |
| Presets: | 6, user definable |
| Range of adjustment and presets may vary according to pulse oximeter specifications |
|
| SpO₂ Accuracy | |
|---|---|
| Saturation within DUT specified range: | ±1 count + specified accuracy of the DUT |
| Heart Rate | |
|---|---|
| Range: | 20 to 300 BPM |
| Increments: | 1 BPM |
| Presets: | 6, user definable |
| Accuracy: | ± 0.25 BPM (sync mode); otherwise, ±1 BPM |
| Pulse Amplitude | |
|---|---|
| Range: | 0 to 100% |
| Increments: | 1% steps. |
| Presets: | 6, user definable |
| Accuracy: | ± 1% |
| Signal Artifact | |
|---|---|
| Four preset simulations: |
|
| Auto Presets: | |
|---|---|
| Unlimited preset patient simulations | |
| Default Auto Presets: |
|
| Alarm Tests: | |
|---|---|
| Automated test sequences for determining oximeter alarm response time to: | |
|
|
| Five defaults, plus unlimited programmable alarm sequences | |
| Communication / User Interface | |
|---|---|
| via vPad-A1 Base Unit: |
Android 5″ tablet:
Dual XBUS for Datrend test automation |
| Power Supply | |
|---|---|
| via vPad-A1 Base Unit: |
|
| Dimensions | |
|---|---|
| 98mm x 208mm x 30mm (3.85” x 8.2” x 1.18”) A1 Base 90mm x 160mm x 24mm (3.54” x 6.3” x 0.95”) SpO₂ Probe |
|
| Weight | |
|---|---|
| 440g (0.96lb) A1 base 122g (0.27lb) SpO₂ Probe |
|
| Environment | |
|---|---|
| 15°C to 40°C, 10% to 90% RH, Indoor Use Only, Category II |
|
All specifications subject to change without notice.
All Datrend vPad Products are designed and manufactured under an ISO13485 registered Quality System and carry a one (1) year warranty from the date of original purchase.
This warranty will automatically be extended to two (2) years from the date of original purchase, provided that calibration is performed on an annual basis by de Smit Medical Systems Ltd, exclusive UK Datrend Authorised Service Centre.
